BDK Yamaha R1 Lightweight Race Generator / Alternator Kit (2015–2025)
Sharpen your Yamaha R1's throttle response with the BDK YRG1-15 lightweight race generator kit. Designed for high-performance fuel-injected engines, it replaces the standard alternator system to reduce rotating inertia and gyroscopic forces for race use.
Fitment
Yamaha YZF-R1, 2015–2025.
Kit includes
- Lightweight flywheel and stator
- Mounting plate and cup fasteners
- Modified generator casing
- Pick-up adjuster plate and connectors
- Dedicated regulator/rectifier
Lightweight rotating assembly
BDK specifies a 106 mm diameter rotor weighing 362 g, less than half the weight of the original rotor. Moving more mass closer to the centre reduces rotational inertia. BDK reports typical gains of approximately 4–5 bhp on a standard bike; actual results vary with setup and state of tune.
The three-phase stator works with a switching regulator/rectifier that reduces generating load once the desired voltage is reached.
Important race-use requirements
- For racing purposes only, not designed for road motorcycles with lights or other high-draw electrical systems.
- BDK states the kit will not charge below approximately 4,500 rpm.
- Use only the dedicated regulator/rectifier. A standard unit is incompatible and can cause excessive heat in the generator windings.